The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Aerosol Primers

Download Technical Specification Sheet Download Health and Safety Sheet
Rust-Oleum Hard Hat Aerosol Zinc Aluminium Spray Bright Galvanizing 2117 is a fast drying zinc rich primer / topcoat based on an epoxy ester resin. The product contains pure Zinc and Aluminium as pigment and provides cathodic protection.

Rust-Oleum Zinc Aluminium Spray 2117 should be used on damaged galvanized steel surfaces and is intended to be applied on small areas or for touch-up.

Rust-Oleum Zinc Aluminium Spray 2117 should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas.


Theoretical: 1.2 m² per spay can at 35 µm dry
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means.
The surface must be clean and dry during application.

Please read data sheets carefully prior to application.

Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

Hard Hat Galva Zinc Alu 2117

Fast drying zinc rich primer/topcoat

Zinc coating with sparkling Aluminium particles

Resists 340 hours salt spray testing (DIN 5002 SS)


Please select a colour to see size/pack options:

Sparkling Aluminium

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £12.80

£15.36 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.