The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Aerosol Topcoats

Download Technical Specification Sheet Download Health and Safety Sheet
 
Rust-Oleum Hard Hat Aerosol Topcoats 2100 are based on a fast drying short oil soya alkyd and the products are based on lead and chromate free pigments.
 
Rust-Oleum Topcoats 2100 should be applied over Rust-Oleum Hard Hat Primers 2169 / 2182 or properly prepared painted substrates.

Rust-Oleum Topcoats 2100 are intended for small maintenance jobs or for touch-up and should be used in light industrial exposures, normal humidity and interior applications.
 

Coverage

Theoretical: 2.5 m² per spray can at 25 µm dry
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
 

Surface Preparation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means.
Prime or spot prime with the recommended Rust-oleum Primers. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application.
 
 
Bright topcoats may need a light coloured primer/intermediate coat. Please read data sheet prior to use.
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.
 

Hard Hat Topcoats 2100

The true industrial paint aerosols!

For use on bare metal, wood and concrete

To handle after 30 minutes (at 20°C)

Best available hiding power

Heat-resistant up to 100 °C

  1. GO FURTHER! More paint in the can, resulting in a higher coverage. One HARD HAT® aerosol equals up to 2-3 standard aerosols.

  2. WORK QUICKER! A higher film build without drips or runs, in one go. Twice the opacity of cheaper paint sprays (saving a cross layer). Normal coverage in one pass. Quicker drying: 10-15 minutes!

  3. LAST LONGER! Higher quality pigments for a longer gloss and colour retention. The tough flexible film resists chipping, cracking and peeling.

Variations

Please select a colour to see size/pack options:

Anthracite Grey Gloss
£53.18
Black Gloss
£53.18
Black Matt
£53.18
Black Satin
£53.18
Bright Red Gloss
£53.18
Clear Ivory Gloss
£53.18
Coleseed Yellow Gloss
£53.18
Cream Gloss
£53.18
Emerald Green Gloss
£53.18
Gentian Blue Gloss
£53.18
Golden Yellow Gloss
£53.18
Grass Green Gloss
£53.18
International Orange Gloss
£53.18
Light Blue Gloss
£53.18
Light Grey Gloss
£53.18
Light Yellow Gloss
£53.18
Melon Yellow Gloss
£53.18
Moss Green Gloss
£53.18
Navy Grey Gloss
£53.18
Ochre Brown Gloss
£53.18
Oyster White Gloss
£53.18
Pastel Orange Gloss
£53.18
Pebble Grey Gloss
£53.18
Red Lilac Gloss
£53.18
Reseda Green Gloss
£53.18
Safety Yellow Gloss
£53.18
Sapphire Blue Gloss
£53.18
Signal Blue Gloss
£53.18
Signal Brown Gloss
£53.18
Signal Green Gloss
£53.18
Signal Yellow Gloss
£53.18
Steel Grey Gloss
£53.18
Traffic Red Gloss
£53.18
Traffic Yellow Gloss
£53.18
Ultramarine Blue Gloss
£53.18
White Aluminium
£53.18
White Gloss
£53.18
White Matt
£53.18
White Satin
£53.18
Yellow Green Gloss
£53.18
Yellow Orange Gloss
£53.18

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £53.18

£63.82 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.