The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Anti-Slip

Download Technical Data Sheet
 
Rust-Oleum Non-Skid 200 & 300 Additives granulates are based on thermally split flint stones.
 

Recommended Uses

Rust-Oleum Non-Skid 200 & 300 Additives are intended to be added to floor coatings to produce a non-skid surface.
Rust-Oleum Non-Skid 200 & 300 Additives can be used in combination with the following Rust-Oleum Floor coatings:
 
 
Rust-Oleum Non-Skid 200 & 300 Additives can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment.

Rust-Oleum Non-Skid 200 & 300 Additives are intended for Non-Skid industrial flooring and should be topcoated with the required Rust-Oleum System if sprinkled.


Coverage

Theoretical: 50 g/m² sparingly (see Recommended consumption)
Practical: Practical usage depends on many factors such as type and amount of contaminants, shape of the substrate and material losses during application. 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

NS200 Anti Skid Additive

Turn a standard floor coating into an anti-slip coating

Non-skid floor additive based on thermally split flint stones

Formulated for use with 2-pack floor coatings

Can be mixed into coating or broadcast over the final (wet) finish

Particle size: 0.2 – 0.5 mm

Variations

Please select a colour to see size/pack options:

White
£8.22
£27.18

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £8.22

£9.86 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.