The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Floor Primers

Download Technical Data Sheet Download Health And Safety Sheet
 
Rust-Oleum 3310 is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion of floor paints on mineral substrates.
 

Main Properties  

  • Easy to apply
  • Excellent adhesion on non-porous and dense mineral substrates
  • Can be recoated with all Rust-Oleum or Mathys floor paints
  • 1 and 2 component product 
  • Prevents, when used on fresh mineral substrates, the saponification of alkyd based top coats.
 

Recommended Uses 

Adhesion and impregnation primer for mineral substrates. 
 

Coverage 

Theoretical: 13 m²/l at 35 µm dry 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 
 

Surface Preparation

New concrete should cure and dry for at least 30 days prior to the application of the product. Remove oil, grease and all other surface contaminations by alkaline or high pressure-(steam) cleaning in combination with appropriate detergents. Remove all laitance, loose or unsound concrete by vacuum-blasting or etching with Rust-Oleum Surfa-Etch 108 Etching Solution. Remove concrete curing compounds completely. Large surfaces should preferably be prepared by abrasive blasting (vacuum blasting) or flame cleaning. Profile maximum 0.5 mm. Defects in the concrete should be repaired with Rust-Oleum Epoxy Repair Mortar 5180 or Pegacrete. Small (hair) cracks and air-pockets should be repaired with Rust-Oleum Epoxy Putty 5412. The surface should be clean and dry during application. 
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

3310 Universal Floor Primer

Ready to use single pack binding primer improves adhesion of coatings on mineral surfaces.

Improves adhesion on non-porous, smooth mineral surfaces

Can be over coated with any Rust-Oleum or Mathys paint or coating

Variations

Please select a colour to see size/pack options:

Clear
£100.19

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £100.19

£120.23 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.