The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Garage Floor Paint

Download Technical Data Sheet Download Health And Safety Sheet - Base Download Health And Safety Sheet - Activator
Rust-Oleum Flexible Epoxy Flooring System B95 Self Levelling is a virtually solvent free, two component epoxy, with a convenient 1:1 mixing ratio. 

Recommended Uses 

Rust-Oleum Flexible Epoxy Flooring System B95 Self Levelling should be used on cleaned, horizontal concrete floors, asphalt-concrete floors or other floors where flexibility is required. 
B95 Self Levelling can be applied on cleaned, well adhering old epoxy floor coatings. The coating offers protection against abrasion and impact and can be applied in a dry film thickness of 150-200 µm (roller) to 2 mm (rake) in one coat. If good U.V. and chemical resistance is required, Rust-Oleum Polyurethane Topcoat 9600 
or 9200 should be applied (except for 9211 or 9610 clear). 


Theoretical: 1 m²/l at 1000 µm dry – 5 m²/l at 200 µm dry 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 

Surface Preparation

General: remove oil, grease and all other surface contaminations by alkaline or (high pressure) steam cleaning. The surface should be clean and dry during application. Previously coated surfaces must be in sound condition and should be roughened in order to achieve optimal adhesion. A test-patch is recommended to check compatibility. 
Concrete: new concrete should cure and dry for at least 30 days prior to the application of the product. Concrete curing compounds should be removed completely. All laitance, loose or unsound concrete should be removed by vacuum blasting or etching with Rust-Oleum Surfa Etch 108. Irregularities should be levelled with Rust-Oleum Scrapecoat 5170.
Defects in the concrete should be repaired with Rust-Oleum Concrete Repairmorter 5180 or Lightweight Repairmorter 5140 directly after having primed with Rust-Oleum Primer 5401 (wet into wet). Very porous concrete should be primed with Rust-Oleum 5401. 
Asphalt-concrete: New asphalt-concrete should cure and dry for at least 60 days prior to the application of the product. Defects in the surface should be repaired with the B95 SL, with fire-dried quartz sand mixed into a ratio of approx. 1:1 in volume. 

Please read data sheets carefully prior to application.

Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

B95 Flexible Self Levelling Epoxy

Two-pack, flexible high-build self-levelling epoxy for floors.

Very flexible self-leveller, very wear and impact resistant

Low odour during application

Can be applied directly to damp surfaces

Good chemical and wear resistance


Please select a colour to see size/pack options:

Off White

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £120.05

£144.06 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.