The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Interior Floor Paint

Download Health And Safety Sheet Download Technical Data Sheet
 
Rust-Oleum® Epoxy Rapid WB 5800 is a rapid curing water-based 2 component epoxy coating for inside floors.
 
  • Provides excellent protection against traffic and moisture 
  • Recoating time of only 3 hours
  • Allows two coats in one day
  • Available in a glossy and matt finish (depending on the choice of activator).
 

Recommended Uses

Rust-Oleum® Epoxy Rapid WB 5800 can be applied on cleaned, sound mineral substrates, sound and well prepared previous coatings. The product can be applied directly on porous substrates; a special primer is not needed.
 

Coverage

Theoretical: 6 m2/l
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
 

Surface Preparation

Concrete must be at least 30 days old, completely dry and free of surface laitance, contaminants and previous poorly bonded coatings. Remove grease, oil and all other surface contaminations by using Alkaline ND14 Cleaner/Degreaser or high pressure (steam) cleaning in combination with appropriate detergents. Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly, check compatibility.
Very smooth concrete or concrete with surface laitance (a weak dusty layer) should be abraded or etched with Rust-Oleum Surfa-Etch 108 to ensure adequate adhesion. The concrete should be thoroughly washed down and allowed to dry after.
 
Rust-Oleum Powerfloat Epoxy Floor Primer 3366 is recommended on powerfloated surfaces.
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

2 Pack Epoxy Rapid WB 5800 Base

A rapid curing water-based 2 component epoxy coating for inside floors

Matt or Gloss activator required for curing

No odour

Long potlife

Over-coat after just 3hrs

Forklift or foot traffic

Variations

Please select a colour to see size/pack options:

Dark Grey
£40.30
Light Grey
£40.30
Light Ivory
£40.30
Mid Grey
£40.30
Tile Red
£40.30
White
£40.30

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £40.30

£48.36 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.