The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Interior Floor Paint

Download Technical Data Sheet Download Health And Safety Sheet - Base Download Health And Safety Sheet - Activator Download Food Certificate
 
Rust-Oleum Solvent-free, High-Build Epoxy System 5500 is based on two-component epoxy resins. 
 

Recommended Uses

Rust-Oleum Solvent-free, High-Build 5500 System is designed for application on concrete and masonry and can also be used on blasted steel. 
 
Rust-Oleum 5500 System is primarily intended for roller application and may also be applied by brush for small areas or touch-up only. 
 
A two coat Rust-Oleum 5500 System assures appropriate protection when contacted with chemicals (see chemical resistance guide), frequent chemical cleaning or high humidity and moisture conditions. 
 
Rust-Oleum 5500 System can be applied directly on properly cleaned, sound mineral substrates, sound, well prepared previous Epoxy coatings; porous substrates should be primed with Rust-Oleum 5401 Impregnation Primer; very dense substrates, like ceramic tiles, should be primed with Rust-Oleum Super Adhesive 3333
 
Rust-Oleum 5500 System can be applied directly on blasted steel or blasted galvanised steel; if required primed with Rust-Oleum 9170 / 9180 Primer.
 

Coverage 

Theoretical: 6.7 m²/l at 150 µm dry 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 
 

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application. 
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

5500 High Build Epoxy

High build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers

Hygienic tile-like coating for floors and walls. Approved for direct dry food contact at room temperature or below.

High build coating (150 microns), very durable

Suitable for frequent cleaning with chemicals

Excellent resistance against immersion; can be used in swimming pools

Resistant to oils, solvents and many chemicals

Approved for direct dry food contact at room temperature or below Class 1 surface spread of flame - BS 476 part 7

Variations

Please select a colour to see size/pack options:

Dunes Tan
£116.11
Light Blue
£116.11
Light Green
£116.11
Light Ivory
£116.11
Red Brown
£116.11
Steel Grey
£116.11
White
£116.11

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £116.11

£139.33 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.