The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Interior Floor Paint

Download Technical Specification Sheet Download Health and Safety Sheet
Rust-Oleum 7100/7100 NS is an easy to apply solvent based Alkyd floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use. The coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistance during short contact periods against lubricating oils, fuel, petrol etc.
Rust-Oleum 7100 Floor Coating is available in two versions, standard and anti slip NS (with a special synthetic anti slip additive).

Recommended Uses


  • 7100 Floor Coating can be applied on concrete floors older than 2 years, which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion.
  • 7100 Floor Coating can also be applied on old good adhering coatings.
  • 7100 can be applied onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.
Remove oil, grease and other contaminations with Rust-Oleum Cleaner/Degreaser for floors or high pressure- (steam) cleaning in combination with appropriate detergents.
Sand old intact coatings to roughen the surface in order to establish a good adhesion. Checkthe compatibility with old intact coatings.
During application the surface should be dry and clean.
On porous concrete a first coat should be applied with 7100 diluted with 10% 7301.
Remove curing compounds by means of dust free blasting.

Please read data sheets carefully prior to application.

Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.


7100 Floor Coating

For use on concrete or metal floors

Touch dry 6 hours

Apply with Brush or Roller

11 stock colours, or tinted to colour of choice

If using on garage floors; Apply 1 thinned coat to concrete, leave overnight and apply 1 full non thinned coat and leave overnight

If possible let hot tyres cool before parking in the garage to avoid adhesion issues


Please select a colour to see size/pack options:

Clear Ivory
English Red
Light Grey
Moss Green
Reseda Green
Steel Grey
Traffic Blue
Traffic Yellow

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £25.78

£30.94 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.