The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Interior Floor Paint

Download Technical Specification Sheet Download Health and Safety Sheet
 
Rust-Oleum EpoxyShield 5200 Ultra is a quick-drying single pack water-based floor coating (epoxy-modified acrylic) for light to medium duty (normal foot traffic/limited vehicular traffic). Good re-sistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre.
 

Recommended Uses

EpoxyShield 5200 Ultra can be applied on concrete floors which are completely clean, dry and treated with EpoxyShield Sealer 5220. Do not apply to smooth and completely sealed concrete or concrete containing a curing compound. Such substrates will prevent a good adhesion. Epoxy-Shield 5200 Ultra can also be applied on old good adhering coatings.
 

Surface Preparation

Remove oil, grease and all other contaminants with Rust-Oleum Alkaline ND14 Cleaner/Degreaser in comibination with high pressure cleaning. Allow new concrete to set for at least 30 days before applying a coating.
Remove laitance, loose and damaged concrete by sandblasting or etching with Rust-Oleum Surfa-Etch 108.
Repair all holes and cracks with EpoxyShield® concrete repair products.
Always pre-treat absorbent, porous surfaces with EpoxyShield® Sealer 5220.
Roughen or blast well-sealed and smooth concrete and treat with Epoxyshield® Sealer 5220 or ap-ply a coat Rust-Oleum Epoxy Floor Primer 3366.
Roughen still-intact floor coatings to ensure good adherence. Remove poorly adhering old coatings with wire brush and sandpaper. During application the surface must be clean and dry.
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

EpoxyShield 5200 Ultra

A quick-drying single pack water-based floor coating (epoxy-modified acrylic) for light to medium duty (normal foot traffic/limited vehicular traffic)

Single pack, water based

For light to medium traffic

Easy to apply

Touch dry after just 2 hours

Satin matt finish

Good resistance to car tyres and various chemicals

Variations

Please select a colour to see size/pack options:

English Red
£54.08
Light Grey
£54.08
Steel Grey
£54.08

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £54.08

£64.90 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.