The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Interior Floor Paint

Download Technical Data Sheet Download Health And Safety Sheet Download Health And Safety Sheet - Activator
 
EpoxyShield is a user friendly and easy to apply water-based epoxy garage floor coating with an ultimate adhesion and durability. The product has an excellent wear, impact and abrasion resistance like heavy foot and vehicle traffic. Resists chemicals and standing water.
 
The kit consists out of a 2-part epoxy coating, a cleaning solution, decoration chips, paint paddle and a instruction DVD.
 

Recommended Uses

Apply on concrete floors, which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a curing compound, which will prevent a good adhesion. Epoxyshield can also be applied on old good adhering coatings.
 

Coverage

Theoretical: Each Epoxyshield kit contains enough product to cover approximately 25 m² of smooth, bare concrete (a normal 1 car concrete garage floor). Very rough or porous concrete may require more material. Expect coverage of 12-20 m² on
those surfaces.
 

Surface Preparation

Remove any oil or grease spots on the floor. Use a scrub brush and a cleaner/degreaser or use a solvent such as mineral spirits. Scrub the spot thoroughly and wipe up excess cleaner with rags or paper towels to keep contaminants from spreading. Rinse thoroughly with fresh water. Repeat as necessary to completely clean. 
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

EpoxyShield Garage Floor Coating

A user friendly and easy to apply water-based epoxy garage floor coating with an ultimate adhesion and durability.

2-part water based epoxy

Complete DIY kit incl. instructions and DVD

1 normally coat suffices

No primer needed

Resists petrol, motor oil, salt and hot tire pick-up

Easy to keep clean

One kit covers up to 25 m²

Variations

Please select a colour to see size/pack options:

Grey
£69.74

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £69.74

£83.69 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.