The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Anti-Mould Paints

Download Technical Specification Sheet Download Health and Safety Sheet
 
Rust-Oleum Solvent Based Hygienic Topcoats 8300 are fast drying, non-yellowing coatings. The products are based on a vinyl acrylic polymer.
 

Recommended Uses

Rust-Oleum 8300 Topcoats should be applied on mineral substrates primed with Rust-Oleum White Masonry Sealer 8399.
 
Rust-Oleum 8300 Topcoats are intended for brush, roller and spray application. Resistant to mild chemical exposure, occasional product spillage,frequent chemical cleaning, intermittent high humidity and moisture.
 
Rust-Oleum 8300 Topcoats can be applied on Rust-Oleum 8399 Sealer or well prepared previous coatings.
 
Rust-Oleum 8300 Topcoats are classified Class 1 Surface Spread of Flame according to BS 476; part 7 : 1987.
 

Coverage

Theoretical: 12 m²/l at 35 μm dry, depending on colour
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
 

Surface Preparation

New concrete, plastered or brick surfaces should cure and dry for at least 30 days prior to the application of coatings. Remove grease, oil and all other surface contaminations by using Alkaline ND14 Cleaner/Degreaser or high pressure (steam) cleaning. Wash total surface with plenty of fresh/warm water or high pressure (steam) cleaning in order to remove all remnants of contamination and cleaners. Sand previous coatings, which are in good condition to remove gloss and to roughen the surface slightly. Remove non adhering old coatings. The surface must be clean and dry during application.
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

8300 Mould Resistant Solvent Based Topcoat

Contains non leaching fungicides

Ideal for use in low temperatures

Non yellowing-resistant to frequent cleaning

Can be applied at below 0 degrees C

Fast drying and low odour

Variations

Please select a colour to see size/pack options:

Amber White
£86.50
Light Ivory
£86.50
White
£86.50
£338.15

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £86.50

£103.80 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.