The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Graffiti Cleaners

Download Technical Data Sheet Download Health And Safety Sheet

 

Graffiti Magic Bare Surface Graffiti Remover is a truly remarkable graffiti remover, incorporating breakthrough technology to give effective removal on both porous & non-porous substrates, including a multitude of uncoated surfaces such as brick, stone, concrete & render. As well as hard surfaces such as those found in rail carriages, shop fronts and bus shelters, it will even remove graffiti from many types of painted surfaces.

  • One safer Graffiti Remover replaces a range of products.
  • Use inside and out on many different surfaces, including Anti-Graffiti coatings.
  • 100% biodegradable formulation.
  • Contains no chlorinated solvents.
  • Gelled for use on vertical surfaces.
  • Easily washes off with water.
  • Fast acting with slow evaporation means it stays wet to work longer.


Test a small hidden area first to check for suitability. Test for ‘dwell’ time (the length of time it takes BSGR to work). Using a clean cloth, check test area every few minutes. When the graffiti is loose and lifting, this is your dwell time. Wipe off and rinse with clean water.

Works best when temperature is 10-30°C. Use neat, do not dilute.

On bare surfaces apply BSGR liberally using a brush. Agitate with a stiff brush if needed and give time to work. When the graffiti is loose, wash down thoroughly using a suitable brush or sponge.
 

On plastics or coated surfaces apply BSGR liberally over area to be cleaned and leave for pre-determined ‘dwell’ time before removal. Wash down and rinse off with clean water.
 

Allow surfaces to dry and repeat if necessary. Be aware that some graffiti will already have damaged some substrates. This often shows as a permanent ‘etch’ or ‘shadow’ after removal.

Please refer to Product Data Sheet prior to use. It is the responsibility of the user to establish the suitability.

 

Graffiti Magic Bare Surface Graffiti Remover

A truly remarkable Graffiti remover, incorporating breakthrough technology to give effective removal on both porous & non-porous substrates as well as from many previously painted surfaces

Can be used inside and out on many different surfaces, including Anti-Graffiti coatings

100% biodegradable formulation

Contains no chlorinated solvents

Gelled for use on vertical surfaces

Easily washes off with water

Fast acting with slow evaporation means it stays wet to work longer

Variations

Please select a colour to see size/pack options:

Gel
£80.00

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £80.00

£96.00 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.