The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Cleaners

Download Technical Data Sheet Download Health And Safety Sheet
 
Rust-Oleum Surfa-Etch 108 Etching Solution is an easy-to-use, non-flammable and virtually odour-free etching solution. 
 

Recommended Uses 

Rust-Oleum Surfa-Etch 108 Etching Solution should be used for etching smooth concrete surfaces, masonry, galvanised steel and aluminium before applying a Rust-Oleum coating system. 
 
Rust-Oleum Surfa-Etch 108 Etching Solution neutralizes alkaline contaminations and removes zinc- and aluminium corrosion products ("white rust"). 
 
Rust-Oleum Surfa-Etch 108 Etching Solution should be applied with a stiff nylon brush or a broom.
 

Coverage 

Theoretical: 6 - 8 m²/l 
Practical: Practical usage depends on many factors such as type and amount of contaminants, shape of the substrate and material losses during application. 
 

Durection For Use 

To ensure homogeneity shake well before use. 
Scrape or sweep away grease, oil, dirt and all other surface contaminations as much as possible. Degrease by means of alkaline cleaning, high pressure (steam) cleaning or, for small patches, by volatile solvent cleaning. 
Apply Surfa-Etch 108 Etching Solution liberally and scrub it into the surface. 
Allow to stand for 10-15 minutes, depending on temperature, and clean thoroughly by flushing with plenty of fresh water. 
Do not allow the Surfa-Etch 108 Etching Solution to dry before rinsing! 
Concrete and masonry may need a second treatment. 
After cleaning, remove any remaining water and allow to dry completely, as moisture left on the surface or entrapped into pores may cause failure of the coating system. 
Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied. 
 

 

Surfa-Etch 108

Etching Solution for etching smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a coating system

Improves the adhesion of coating systems

Neutralizes alkaline salts

Also ideal to remove ´white rust´ from metal

No objectionable odour or fumes

Non-flammable

Variations

Please select a colour to see size/pack options:

Clear
£44.46

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £44.46

£53.35 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.