The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Marine Anti-Fouling

Download Technical Data Sheet Download Health And Safety Sheet Download Health and Safety Sheet - Red
Teamac New Antifouling 'D' is a modified composition containing a high level of Cuprous Oxide to give good antifouling performance.
Designed for vessels with a max speed of 25 to 30 knots. Expected functional life of the coating is 18 to 24 months
H.S.E. Approval No. 7218

Recommeded Uses

Teamac New Antifouling 'D' is used as an antifouling for the underwater areas of marine vessels or underwater structures. Suitable for domestic and commercial vessels with steel, wood, or GRP hulls.

Surface Preparation

DO NOT USE ON ALUMINIUM VESSELS. Bare Surfaces: On exposed metal and wood, prime first with at least 2 coats of Teamac Metaclor Underwater Primer (but not more than 3). On GRP lightly abrade exposed surfaces and apply 2 coats of Teamac Metaclor Underwater Primer

New Steel: Abrasive blast clean to Sa2½ and apply Teamac Metaclor Underwater Primer. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the Metaclor.
Maintenance: Remove all loose and damaged existing coating and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with Metaclor Primer to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates.

Preceding Coat 

Subsequent Coat 

Cleaning Solvent: Thinners 17
Applcations Special Conditions: Application by spray is only permitted by professionals. Amateur use must be by brush or roller.
Please read data sheets carefully prior to application.


Users must comply fully with all their legal responsibilities under the Control of Pesticides Regulations 1986 (as amended), including complying with all conditions of approval. H.S.E. Approval No 7218. Launch time after painting - minimum 8 hours, maximum 3 months if shrouded from direct sunlight. Minimum 2 coats. 

Teamac Anti-Fouling D

Won best buy anti-fouling in yachting monthly magazine

A physically ablative anti-fouling offering excellent performance and protection

Wears away at a controlled speed for vessels with a maximum speed of 25-30 knots

Has a softer film than Tropical Killa but gives superior performance


Please select a colour to see size/pack options:


Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £85.04

£102.05 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.