The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Marine Anti-Fouling

Download Technical Data Sheet Download Health And Safety Sheet
Teamac Marine Protector Antifouling contains Cuprous Oxide to give good antifouling performance. Designed for vessels with a max speed of 25 to 30 knots. Expected functional life of the coating is 12 to 18 months.
H.S.E. Approval No. 8375

Recommended Uses

Teamac Marine Protector Antifouling is used as an antifouling for the underwater areas of vessels or underwater structures. Suitable for domestic and commercial vessels with steel, wood, ferro concrete or GRP hulls.

Surface Preparation

New Steel: Abrasive blast clean to Sa2½ and apply Teamac Metaclor Underwater Primer. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the Metaclor.
Maintenance: Remove all loose and damaged existing coating, and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with Metaclor Primer to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates.

Preceding Coat

Subsequent Coat

Cleaning Solvent: Thinners 17

Application Special ConditionsApplication by spray is not permitted except by professionals.
Please read data sheets carefully prior to application.

Teamac Protector Anti-Fouling

A cruiser grade anti-fouling offering competitive performance at a good price

Suitable for vessels with a maxium speed of 25-30 knots

Good compatibility


Please select a colour to see size/pack options:


Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £58.24

£69.89 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.