The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Marine Wood Primer

Download Health And Safety Sheet Download Technical Data Sheet
 
Teamac Metaclor Underwater Primer is a modified chlorinated rubber primer for multipurpose use on steel and wood.
 

Recommended Uses
 

Teamac Metaclor Underwater Primer can be used as an underwater primer on prepared steel or as a sealer coat over most conventional systems.
 

Surface Preparation

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed but hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with solvent before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds, etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
 
Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly. Apply to small test area first to ensure no reaction with conventional paints.
 

Maintenance

Remove all marine growth, oil and grease. High pressure wash with fresh water. Remove all loose coating and power tool clean areas of breakdown. Bare areas should be spot primed to full film thickness prior to application of full coat.
 

Preceding Coat

Directly onto base prepared steelwork or wood. Can be applied to old, aged coatings including antifouling after recommended preparation.
 

Subsequent Coat

Teamac Anti-Fouling Paints or part of a specified Teamac Anti-Corrosive System.
 
Clenaing Solvent: Thinners 16
 
 
Please read data sheets carefully prior to application.

Teamac Metaclor Underwater CR Primer

A multi-purpose underwater primer offering good resistance and protection

Can be used above and below the water line

To be applied over suitably prepared wood, metal and GRP

Variations

Please select a colour to see size/pack options:

Metallic Grey
£37.08
£70.75

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £37.08

£44.50 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.