The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Heat Resistant Primers

Download Technical Specification Sheet Download Health and Safety Sheet


Rust-Oleum Hard Hat Aerosol Galva Expresse 2180 is a very fast drying zinc rich primer based on a styrene-acrylic resin. The product contains pure zinc as pigment and provides excellent protection against corrosion.

Rust-Oleum Galva Expresse 2180 should be used on new, bare steel or galvanised steel surfaces and is intended to be applied on small areas or for touch-up.

Rust-Oleum Galva Expresse 2180 can be recoated with non-saponifiable coatings and should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.


Theoretical: 1.4 m² per spray can at 35 μm dry
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means.
The surface must be clean and dry during application.

This product is lead and chromate free thus eliminating the danger of poisonous gases escaping if the coated surface needs to be welded at a later date.


Please read data sheets carefully prior to application.

Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

Hard Hat Galva Expresse 2180

To handle after just 10 minutes (at 20°C)

For new, bare, rust free metal or galvanised steel

Resists 400 hours of salt spray testing (DIN)

Heat-resistant up to 350 °C

Ideal for production and construction work


Please select a colour to see size/pack options:


Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £56.23

£67.48 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.