The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Heat Resistant Primers

Download Technical Data Sheet Download Health And Safety Sheet
 
Rust-Oleum Cold Galvanizing Compound 1085 is a fast drying, zinc rich primer based on a epoxy ester resin. The product contains pure zinc as pigment and provides cathodic protection.
 

Recommended Uses

Rust-Oleum Cold Galvanizing Compound 1085 should be used on new, bare steel, blasted steel or galvanized steel surfaces.
 
Rust-Oleum Galvanizing Compound 1085 is primarily intended for brush application on small areas or for touch-up.
 
Rust-Oleum Galvanizing Compound 1085 can be recoated with non-saponifiable coatings.
 
Rust-Oleum Galvanizing Compound 1085 should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 
 

Coverage

Theoretical: 13 m²/l at 35 µm dry
                       4,7 m²/kg at 35 µm dry
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
 

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust
scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 µm. The surface must be clean and dry during application.
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

Hard Hat Galva Zinc 1085

The No. 1. Zinc Coating (Brush)

90% zinc in the dry film (99% pure zinc)

To protect bare, rust free metal and galvanised

Ideal for touching-up larger areas

Conforms to DIN 50.976 (1983)

Resists 430 hours of salt spray testing (DIN)

Heat-resistant up to 300°C

Variations

Please select a colour to see size/pack options:

Matt Grey
£15.36

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £15.36

£18.43 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.