The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Heat Resistant Topcoats

Download Technical Data Sheet Download Health And Safety Sheet
Rust-Oleum Hard Hat Aerosol Metallic Topcoats 2100 are based on a fast drying acrylic resin. The products are based on metallic pigments and are lead and chromate free. 
Rust-Oleum Metallic Topcoats 2100 should be applied over Rust-Oleum Hard Hat 2169/2182 Primers or properly prepared painted substrates; they can be recoated with Rust-Oleum Hard Hat 2500 Clear
Rust-Oleum Metallic Topcoats 2100 are intended for small maintenance jobs or for touchup
Rust-Oleum Metallic Topcoats 2100 should be used in light industrial exposures, normal humidity and interior applications


Theoretical: 2.5 m² per spray can at 25 µm dry (1.5 m² for 2115 and 2119) 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 

Surface Preparation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. 
Prime or spot prime with the recommended Rust-Oleum Primers. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application.
Bright topcoats may need a light coloured primer/intermediate coat. Please read data sheet prior to use.

Please read data sheets carefully prior to application.

Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

Hard Hat Metallic Topcoats 2111

Metallic sprays combine a bright metallic appearance with the durable protection of a standard topcoat

Metallic spray: nice finish, good protection

For bare metal and galvanised steel

Usable as topcoat on zinc primers and galvanised

Finish with transparent topcoat for the best result

Ideal for machinery, pumps, toolboxes, etc.

Heat-resistant up to 100 °C

  1. GO FURTHER! More paint in the can, resulting in a higher coverage. One HARD HAT® aerosol equals up to 2-3 standard aerosols.

  2. WORK QUICKER! A higher film build without drips or runs, in one go Twice the opacity of cheaper paint sprays (saving a cross layer). Normal coverage in one pass. Quicker drying: 10-15 minutes!

  3. LAST LONGER! Higher quality pigments for a longer gloss and colour retention. The tough flexible film resists chipping, cracking and peeling.


Please select a colour to see size/pack options:

Bright Aluminium
Sparkling Aluminium
Stainless Steel

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £61.05

£73.26 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.