The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Cladding Primer

Download Technical Specification Sheet Download Health and Safety Sheet
 
Rust-Oleum Metal Cladding Primer is a water dilutable coating based on a modified styrene acrylic copolymer and specially designed for application on weathered metal cladding
 
The Metal Cladding Primer is primarily intended for brush application and can also be applied by roller and spray. It is easy to apply, Quick drying, Lead and chromate free. 
 
Rust-oleum Metal Cladding Primer can be used on a wide variety of substrates like bare or blasted steel, galvanised steel, zinc, aluminium and steel protected by plastisol. It provides corrosion protection under industrial exposure conditions, if followed by a coat of Mathys® Metal Cladding Topcoat.
On bare or blasted steel two coats of Metal Cladding Primer should be applied prior to the application of the Metal Cladding Topcoat.
 

Coverage 

Theoretical: 12.5 m²/l at 35 µm dry 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 
 

Surface Preparation: 

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1: 1988), blast profile max. 50 µm. If blasting is not possible remove loose rust and loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1: 1988). 
Zinc or aluminium corrosion products can be removed with Rust-oleum Surfa-Etch 108 Etching Solution followed by rinsing with plenty of fresh water, or by brush-off blasting. Remove deteriorated coatings by scraping and wire brushing. Sand intact coatings to roughen the surface slightly. The surface must be clean and may be slightly damp during application.
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

Metal Cladding Primer

A water dilutable coating based on a modified styrene acrylic copolymer and specially designed for application on weathered metal cladding

Ideal for over coating with Metal Cladding Topcoat

Variations

Please select a colour to see size/pack options:

Grey
£102.38
Light Grey
£102.38
White
£102.38

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £102.38

£122.86 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.