The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Primers

Download Technical Data Sheet Download Health And Safety Sheet

 

Rust-Oleum 1060/1080 High Build Primer is based on a fish oil containing alkyd resin. The primer contains rust-inhibitive pigments and is lead- and chromate free

 
Rust-Oleum 1060/1080 should be used on new, blasted steel surfaces or on surfaces primed with Rust-Oleum Alkyd Primers
 
Rust-Oleum 1060/1080 is primarily intended for brush application and can also be applied by roller and spray
 
Rust-Oleum 1060/1080 assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum Alkyd Primer followed by a Rust-Oleum Alkythane 7500
 

Coverage 

Theoretical: 60 µm dry, equals 105 µm wet
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 
 

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. 
For optimum results remove rust, rust scale, mill scale, and deteriorated coatings by abrasive blasting to Sa 2 1/2 (ISO 8501-1: 1988), blast profile max. 50 µm. Sand previous coatings, which are in good condition to roughen the surface slightly. 
The surface must be clean and dry during application.
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

1060 / 1080 High Build Metal Primer

High build metal primer for extra protection of bare or blasted metal

Maximum durability under severely corrosive conditions

High build primer (60m in a single layer)

High content of rust-inhibiting pigments

Lasting flexibility

Excellent flow

Variations

Please select a colour to see size/pack options:

Grey
£80.47
Orange
£80.47

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £80.47

£96.56 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.