The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Primers

Download Technical Data Sheet Download Health And Safety Sheet

 

Rust-Oleum Speedy Recoatable Metal Primer 569 Red / 580 Grey are fast drying primers based on a aromatic free modified short oil alkyd resin. The products contain rust inhibitive pigments and are lead- and chromate free

Recommended Uses

Rust-Oleum 569 / 580 should be used on new, blasted or slightly rusted steel surfaces
 
Rust-Oleum 569 / 580 are primarily intended for brush application and can also be applied by roller and spray.
 
Depending on the exposure conditions Rust-Oleum 569 / 580 can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection; e.g. at heavy industrial exposures a two-coat system of Rust-Oleum 569 / 580 and Rust-Oleum High Performance Epoxy System 9100; at light industrial exposures Rust-Oleum Primer 1060 / 1080 and/or a second Rust-Oleum Alkyd Primer followed by an Alkythane 7500
 

Coverage 

Theoretical: 12.8 m²/l at 35 µm dry 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
 

Surface Preparation 

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. 
For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 µm. 
If blasting is not possible remove loose rust and loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1 : 1988). 
Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly. The surface must be clean and dry during application.
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.
 

569 / 580 Quick Drying Metal Primer

Single pack quick drying metal primer for bare and lightly rusted metal

Recoatable after just 2 hours

For new, blasted or slightly rusted metal

Single pack product

Excellent flow

Variations

Please select a colour to see size/pack options:

Grey
£80.32
Red Brown
£80.32

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £80.32

£96.38 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.