The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Primers

Download Technical Data Sheet Download Health And Safety Base Download Health And Safety Activator


Rust-Oleum High-Performance Epoxy System Rust Primer 9169 is based on two component, solvent-based epoxy resins. The product contains rust-inhibitive pigments and is lead and chromate free.


Recommended Uses

Rust-Oleum High-Performance Epoxy System Rust Primer 9169 is designed for application on manually prepared rusted steel surfaces. 
Rust-Oleum 9169 Rust Primer is intended for brush application and can also be applied by roller and spray. 
Rust-Oleum 9169 Rust Primer can be recoated with Rust-Oleum 9170/80 Primers and 9100 Topcoats, offering the appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and frequent chemical cleaning; high humidity and moisture conditions


Theoretical: 11.7 m²/l at 50 µm dry 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. 
Remove loose rust, mill scale and deteriorated coatings by hand or power tool cleaning to St 2/3 (ISO 8501-01 : 1988). Large areas may be brush-off blasted to Sa 2 (ISO 8501-01 : 1988), blast profile max. 50 µm. Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly, check compatibility. The surface must be clean and dry during application

Please read data sheets carefully prior to application.

Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

9169 Epoxy Rust Primer

Low viscous epoxy rust-primer with outstanding adhesion on and corrosion protection for manually derusted metals.

Can be applied directly to sound rusted surfaces (less work)

Penetrates through rust onto sound metal

Easy to apply

First class adhesion on a second class surface

Easy to apply by brush, roller or spray


Please select a colour to see size/pack options:

Red Brown

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £120.13

£144.16 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.