The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Primers

Download Technical Specification Sheet Download Health And Safety Base Download Health And Safety Activator
 
Rust-oleum 9170/9180 Epoxy Metal Primer is designed for application on bare or blasted metal and properly prepared galvanized substrates or as an intermediate coat. 
 
Rust-oleum 9170/9180 Primers are primarily intended for spray application; brush and roller application for touch-up only. 
 
Rust-oleum 9170/9180 Primers can be recoated with 9100 topcoats, offering the appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and frequent chemical cleaning; high humidity and moist conditions
 

Coverage 

Theoretical: ± 7 m²/l at 75 µm dry 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 
 

Surface Preparation 

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-01 : 1988), blast profile max. 50 µm. Salts, "white rust" (on galvanised steel), etc. should be removed by washing with Rust-oleum Surfa-Etch 108 Etching Solution or by sweep blasting.
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

9170/9180 Epoxy Metal Primer

A fast drying metal primer based on two-component, solvent-based epoxy resins offering extra protection against corrosion on bare or blasted metal.

Contains special rust-inhibitive pigments and is lead and chromate free

Apply by spray brush or roller

Variations

Please select a colour to see size/pack options:

9170 Red Brown
£120.13
9180 Grey
£120.13

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £120.13

£144.16 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.