The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Primers

Download Technical Specification Sheet Download Health and Safety Sheet
 
Rust-Oleum Hard Hat Aerosol Red Primer 2169 / Grey Primer 2182 are fast drying primers based on short oil soya alkyd.
 
Rust-Oleum Red Primer 2169 / Grey Primer 2182 should be used on new, bare or slightly rusted steel surfaces and is intended to be applied on small areas or for touch-up.
 
Rust-Oleum Hard Hat Anti Rust Primer 2169 / 2182 should be used in light industrial exposures, normal humidity and interior applications and should be re-coated with Rust-Oleum Hard Hat Topcoats.
 

Coverage

Theoretical: 2.5m² per spray can at 25 µm dry.
Practical: Practical coverage depends on many factors such as prososity and roughness of the substrate and material losses during application.
 

Surface Preparation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means.  Sand intact coatings to roughen the surface slightly.  The surface must be clean and dry during application.
 
 
Being Lead and Chromate free these products do not evolve the risk of toxic fumes when surfaces coated with these products are welded at a later date.
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

Hard Hat Anti-Rust Primer 2169 / 2182

Ready to re-coat in 10 minutes

For new and slightly rusty surfaces

Lead and chromate free

Variations

Please select a colour to see size/pack options:

Grey
£55.02
Red Brown
£55.02

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £55.02

£66.02 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.