The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Primers

Download Technical Data Sheet Download Health And Safety Activator Download Health And Safety Base

 

Teamac 2 Pack Zinc Phosphate Primer is a two pack, non-toxic, epoxy zinc phosphate primer for application to steel which is clean and free from scale and/or rust.

 

Recommended Uses:

Teamac 2 Pack Zinc Phosphate Primer is used for application to blast cleaned and other suitably prepared steel surfaces. It is not suitable for use as a weld through blast primer. Provided the steel has been cleaned effectively an outstanding bond is formed between primer and metal.
 

Surface Preparation:

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with solvent before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
 

Preceding Coat:

Can be applied over 2 pack zinc phosphate blast primers which are free from contamination.
 

Subsequent Coat:

Most one-pack and two-pack materials.

Teamac 2 Pack Epoxy Zinc Phosphate Primer

An excellent quality heavy duty anti-corrosive primer for use on metal surfaces in preparation for subsequent top coats

Often used prior to the application of P101 high performance top coat on metal/steel

Variations

Please select a colour to see size/pack options:

Grey
£83.73
Red
£83.73

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £83.73

£100.48 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.