The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Topcoats

Download Technical Data Sheet Download Health And Safety Base Download Health And Safety Activator

 

Rust-O-Thane Topcoat 9200 is a topcoat based on a two- component waterbased acrylic polyurethane.

 
Rust-O-Thane 9200 is intended for application on substrates, which are coated with Rust-Oleum or Martin Mathys epoxy or acrylic coatings (e.g. Rust-Oleum: 9100 and 5401; Mathys: Pegasol and Pegalink).
 
The application area consists of coated floors, coated walls and primed metal. 
 
Rust-O-Thane 9200 can be applied by airless spray, roller and brush. 
 
Rust-O-Thane 9200 assures appropriate protection against solvents, moderate alkalines, weak acids and chemical cleaning. 
 
Rust-O-Thane 9200 is especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required.
 

Coverage 

Theoretical: 6,2 m²/l at 60 µm dry (depending on colour) for floors. 
9,2 m²/l at 40 µm dry (depending on colour) for other applications. 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 
 

Surface Preparation 

Remove grease, oil and all other surface contamination using alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Sand previous coatings that are in good condition to remove gloss and to roughen the surface slightly. Assure that the prevous coating is compatible with the Rust-O-Thane 9200 by making a test application! Remove bad adhering coatings by scraping, wire brushing or sanding. (Spot) prime with commended Rust-Oleum or Mathys coatings. The surface must be clean and dry during application.
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

9200 Rust-O-Thane

Satin water based polyurethane for a very durable and colourfast finish on metal

Very durable and UV-resistant, colour and gloss retention

Very easy to clean (also with chemicals)

Very low odour, can be used indoors

High abrasion resistance, low wear

Flexible and impact resistant

Can also be used on floors and walls

Variations

Please select a colour to see size/pack options:

Clear
£83.71
Custom
£88.65

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £83.71

£100.45 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.