The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Topcoats

Download Technical Data Sheet Download Health And Safety Base Download Health And Safety Activator


Rust-O-Thane Polyurethane Topcoats 9600 are based on a two-component aliphatic polyurethane.

Rust-Oleum Rust-O-Thane 9600 Polyurethane is intended for application on substrates which are coated with Rust-oleum epoxy systems.
Rust-O-Thane 9600 can be applied by spray, roller and brush application if the appropriate thinner is used.
Rust-O-Thane 9600 Polyurethane assures appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and chemical cleaning; high humidity and moisture conditions. Rust-O-Thane 9600 Topcoats are especially recommended when weather resistance is required


Theoretical: 13.2 m²/l at 40 µm dry (depending on colour)
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

Remove oil, grease and all other contamination by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Sand previous coatings, which are in good condition to remove gloss and to roughen the surface slightly. Assure that the previous coating is compatible with the Rust-oleum System 9600 by making a test application. Remove bad adhering coatings by scraping, wire-brushing or sanding. (Spot) prime with the recommended Rust-Oleum epoxy coating. The surface must be clean and dry during application.

Please read data sheets carefully prior to application.

Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

9600 Rust-O-Thane

Flexible solvent based polyurethane for a very durable and colourfast finish on metal

Very durable, colourfast and chemical resistant

UV-resistant; ideal for outdoor use

Very easy to clean (also with chemicals)

Suitable for high humidity and moist conditions

Flexible and impact resistant

Drying can be accelerated with Accelerator 9997

Can also be used on floors and walls


Please select a colour to see size/pack options:

Clear Gloss
Reseda Green
Steel Grey

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.



Price: £139.75

£167.70 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.