The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Metal Topcoats

Download Technical Data Sheet Download Health And Safety Sheet Download Health And Safety Sheet - Black
 
COO-Var Hammercote Hammered Enamel is a fast drying coating giving a metallic hammered finish to metallic objects. For applications where a hard, durable, metallic finish is required. Wrought iron, cast metal parts, tool boxes, machinery, instruments etc.
 

Surface Preparation:

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impracticable, mechanical cleaning should be employed but hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with solvent before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
 

Application Conditions:

As dictated by normal good painting practice. In confined spaces provide adequate ventilation during application and drying.

Hammercote Hammered Finish

A fast drying, durable and rust resistant coating giving a metallic hammered finish to metal objects

Can be used without a primer

Variations

Please select a colour to see size/pack options:

Black
£37.04
£61.25
Blue
£37.04
£61.25
Bronze
£37.04
£61.25
Dark Green
£37.04
£61.25
Dark Grey
£37.04
£61.25
Light Green
£37.04
£61.25
Purple
£37.04
£61.25
Red
£37.04
£61.25
Silver Grey
£37.04
£61.25

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £37.04

£44.45 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.