The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Exterior Walls

Download Technical Data Sheet Download Health And Safety Sheet - Base Download Health And Safety Sheet - Activator
 
Rust-Oleum B95 Flexible Epoxy System is based on two component, modified lowmolecular epoxy resins and is practically solvent free.  
 

Recommended Uses 

Rust-Oleum B95 Flexible Epoxy System is designed for application on concrete, masonry, and hand tool prepared, blasted, primed or galvanized steel. 
 
Rust-Oleum B95 Flexible Epoxy System is primarily intended for airless spray application and may also be applied by brush and roller. 
 
Rust-Oleum B95 Flexible Epoxy System offers appropriate corrosion resistance in severe industrial and coastal exposures; high humidity and moisture conditions. 
 
Rust-Oleum B95 Flexible Epoxy System is, due to its flexibility, especially suitable for concrete and steel floors showing good abrasion- and impact resistance; porous substrates should be primed with Rust-Oleum 5401 Impregnation Primer; very dense substrates, like ceramic tiles, should be primed with Rust-Oleum Super Adhesive 3333
 
Rust-Oleum B95 Flexible Epoxy System can be applied directly on properly prepared steel or galvanized steel, on itself, on Rust-Oleum 9170/9180 Primers or Epoxy Rust Primer 9169. This product is also suitable for application on old, reversible coatings such as Chlorinated Rubbers, Vinyls, etc. If good U.V. and/or chemical resistance is required Rust-Oleum Polyurethane Topcoat 9600 should be applied. 
 

Coverage 

Theoretical: 6.6 m²/l at 150 µm dry. 
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. 
 

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Sand intact coatings to roughen the 
surface slightly. Check compatibility, especially when applied on reversible coatings, the application of a test-patch is strongly recommended. The surface must be clean and dry during application. 
 
 

Please read data sheets carefully prior to application.

 
Please note that delivery lead times for this item may vary. Please feel free to contact the office on 01934 825850 for a confirmed delivery date prior to ordering.

B95 Flexible Epoxy

Two-pack, flexible high-build epoxy for metal, concrete, masonry, and hand tool prepared, blasted, primed or galvanized steel.

Excellent corrosion, wear and impact resistance

High build coating (150 micron), very durable and impact proof

Flexible coating moves with the surface, avoiding cracking and peeling

Low odour during application

Full colour intensity in one coat

Can also be used on walls and skirting next to a floor coated with B95SL

Variations

Please select a colour to see size/pack options:

Dunes Tan
£294.18
Light Green
£294.18
Light Grey
£294.18
Steel Grey
£294.18

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £294.18

£353.02 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.